Batteries

The Smart BMS CL 12-100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12-100 monitors and protects each individual battery...

The Smart BMS 12-200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats. It combines a Current...

This cable connects the VE.Bus BMS to the Smart BMS 12/200, enabling the alternator charge control feature of the BMS 12/200 to be used in systems with a VE.Bus BMS. The BMS 12/200 will limit the alternator charge current to a safe value and stop the...

The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low power digital signal. The DC load can be resistive, capacitive or inductive (such as the coil of a high-power contactor).The SolidSwitch is not reverse polarity...

The smallBMS can replace the VE.Bus BMS V2 in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface. The smallBMS is intended for use with Victron Smart LiFePo4 batteries...

The VE.Bus BMS V2 is a Battery Management System (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery Smart 12,8V & 25,6V (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus...

The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle...

The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle...

The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle...

With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE. Bus BMS / VE.Bus BMS V2 – recommended for systems with our inverter/chargers. smallBMS –...

With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE. Bus BMS / VE.Bus BMS V2 – recommended for systems with our inverter/chargers. smallBMS –...

With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE. Bus BMS / VE.Bus BMS V2 – recommended for systems with our inverter/chargers. smallBMS...