Battery management systems (BMS)

The SmallBMS NG is an all-in-one Battery Management System (BMS) designed for Victron Lithium NG batteries (not compatible with Lithium Battery Smart batteries). It monitors and protects the batteries by managing charge and load disconnects and providing...

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is available in 1, 2, 3 and 5m lengths.

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is available in 1, 2, 3 and 5m lengths.

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is available in 1, 2, 3 and 5m lengths.

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is available in 1, 2, 3 and 5m lengths.

The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12/100 monitors and protects each individual battery...

The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12/100 monitors and protects each individual battery...

The Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats. It combines a Current...

With this cable the charge control feature of the BMS 12/200 can be used together with the VE.Bus BMS. The BMS 12/200 will limit charge current by the alternator to a safe value, and and stop the charge process in case of an alarm (the Li-ion battery...

The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low power digital signal. The DC load can be resistive, capacitive or inductive (such as the coil of a high-power contactor). The SolidSwitch is not reverse polarity...

The smallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface. The smallBMS is intended for use with Victron Smart LiFePo4 batteries...

The VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery. Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature. Victron LiFePO4 batteries...