Blog

New to the Victron GX range are these handy covers to protect your prized touch screen monitor against UV where it may be exposed for prolonged periods to direct sunlight.

The new Cerbo-S. With component shortages plaguing industries from all sectors, it spurred Victron into producing a scaled down Cerbo GX that probably should have already been on a future roadmap, if you ask me. The Cerbo-S is much the Cerbo, but without the 4 temperature sense or 4 tank sense inputs. It also lacks the BMS-Can port, which is used to receive data from smart batteries, such as the highly popular Pylontech 48V range, and is typically found in domestic grid-tied ESS setups. So, for …

New product - Sun InverterThe Sun Inverter combines a sinewave inverter and a PWM solar charger in one enclosure and is easy to install, with a minimum of wiring.The inverter allows you to power domestic equipment - requiring 230V AC - using 'leisure' or 'automotive' batteries rated at 12V or 24V.The solar charger ensures that the batteries are being charged by energy harvested from your solar panels. The charge algorithm is programmable.The inverter and solar charger parameters can be rea …

New product announcementThe Victron Phoenix Smart IP43 Charger 120-240VWith boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of up to three battery banks. Alternatively, the Phoenix 1+1 model provides 3A to the starter-battery and the rest to the ‘house’ bank. 24V Models are available with 16A/25A charge. Bluetooth enabled, you can conveniently monitor the charger and easily set alarms straight from your phone. …

The EV Charging Station has three phase and single-phase capabilities. It delivers maximum 22kW AC in three phase mode or 7.3kW in single phase mode.It incorporates 4.3-inch LCD touch screen for monitoring and control.Fully programmable RGB Light Ring around charging port, to quickly determine the device state.It can be programmed from the web interface to display different light effects based on the current state (disconnected, charging, charged etc.). The objective is to help the user se …