Cables

Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.

The VE.Can RJ45 terminator comes in a bag of two when ordered separately. The terminators are also included with some products, for example with the CANUSB.

5m RS485 to USB interface for connecting energy meters such as the ET112 to your GX device in a Victron ESS system. Can be configured in ESS as a grid meter, PV meter for existing grid-tie PV installations or an AC meter.

RS485 to USB interface, available in 1.8 m and 5 m. For use with the ET112 and other energy meters in an ESS system.

VE.Direct to RS232 interface

RS232 to USB converter

Interface MK2.2b (VE.Bus to RS232)

This NMEA 2000 drop cable connects a VE.Bus product, for example a Multi or Quattro, to a NMEA 2000 network. It transmits monitoring information, AC voltages and currents, DC voltages and currents and the state. Other NMEA 2000 devices can also send...

The CANUSB interface is used to connect a VE.Can product to a computer.

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus...

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus...

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.