Miscellaneous

Use this cable to connect the following products to the VE.Bus BMS: - Skylla-TG all models - Battery Protect models BP40i, BP60i and BP200i (all discontinued). The cable translates the remote on/off driver logic from the VE.Bus BMS (normally high, and...

Use this inverting remote on/off cable to connect Victron inverters and inverter/chargers that require an active pull-down remote signal—including the (discontinued) (Phoenix) Inverter 12/180, 24/180, 12/350 and 24/350, as well as all (Phoenix)...

Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.

Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.

Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.

Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.

The VE.Can RJ45 terminator comes in a bag of two when ordered separately. The terminators are also included with some products, for example with the CANUSB.

RS485 to USB interface, available in 1.8 m and 5 m.

RS485 to USB interface, available in 1.8 m and 5 m.

Connect products with a VE.Direct connection and an RS232 connection with Victron's VE.Direct to RS232 interface.

The Victron RS232 to USB Converter connects Victron products with an RS232 port to a device that has a USB inlet, such as a computer or a GX device. It’s commonly used for configuring settings, monitoring, or integrating RS232-based devices into...

Interface MK2.2b (VE.Bus to RS232)